Pouch Sheath

In most cases the Welt can be cut to provide a camming effect to hold the knife tight with no straps or snaps to get in your way.

(shown with chocolate leather
and python inlay)

High Ride Pouch Sheath

This is my standard pouch sheath except the belt slot is a separate piece of leather sewn to the back of the sheath.  Can be straight, cross draw, or strong side.  This sheath sits high and tight to the body.

(shown with dark brown leather and dark brown gator inlay)

Strap Pouch

Most secure type of pouch sheath.  Comes up high on the handle and has a strap and snap around the handle and above the guard.

(shown with black leather and gold shark fancy inlay)

Folder Holster

For folders or pocketknives.  Allow you to carry your knife in a convenient position.  Easy access, and it shows of your nice folder.  Who would want to put a great knife in a pocket full of keys and change where it will get beat up?  Show it off.

(shown with natural leather and dark brown shark inlay)

Full Flap Pouch

Offers more security with a full flap covering the knife.  Can be as fancy as you like, with tooling or exotic inlays.

(shown with natural leather and dark brown shark inlay)

Concealment

Comes with just a frog button on the front.  Slip this either behind your belt or inside your waistband.

(shown with light brown leather, border tooled)

Boot/Pocket Sheath

Strong spring clip so you can wear it anywhere you wish: on your belt, inside your waist band, or the top of your boot, etc.

(shown left to right with natural leather and full-quill ostrich, black leather and border tooling, and plain)

Concealment w/ belt loop

Same as summer special handgun holster.  Goes inside your pants while the loop stays outside to go around your belt.  Very secure and concealable.

(shown with roughout leather)

High Ride/Crossdraw

Designed to be worn on your belt and can be made three different ways: straight drop, crossdraw, or strong side (butt forward).  All options such as tooling, exotic inlays, or kydex lining are available on these sheaths.

(shown with black and natural two-tone, floral carved)

High Ride w/ drop loop frog.

This sheath is very versatile as it can be used as a standard concealment sheath by use of the frog button on the front, a hi ride by using the belt slot sewn to the back of the sheath, or as a drop loop by sliding the sheath down into the frog.

(shown with dark brown leather and gator back inlay)

Drop Loop

Traditional drop loop sheath constructed of heavy 10-11 oz. leather.  It is still a very popular way to carry practically any size or style of knife.  Extra wedge of heavy leather between the knife and the belt loop, which allows the sheath to hang straight and not have curve around the guard and handle.

(shown left to right with light brown leather and dark brown shark inlay, with acorn & oak leaf carved with dyed background)

Cowboy

Great for Cowboy Action Shooters.  The loop around the body of the sheath can be placed in such a way as to fit over the wide cartridge belts that are so common with the Cowboy Shooters.  Swelled center of the loop is also a good place for an initial or a silver concha.  Cowboys like silver stuff!

(shown with natural leather and rattlesnake inlay, with basket weave and border tooling)

Belt Slide (Pancake Style)

These sheaths work very well, they hold the knife in tight against your body.  They can be made to carry strong side, crossdraw, or BTB (which is quite concealable).

(shown with natural leather and dark brown gator back inlay)

PinLoc

I have improved my PinLoc by pitting the strap on a swivel.  This allows the strap and pin to move completely out of the way when opened.  this system works really well with a solid copper pin holding the knife very secure in the sheath.  No chance of cutting the strap while inserting or drawing the knife.

(shown with dark brown and natural two-tone leather with acorn & oak leaf and basket weave tooling)

Quad Position

Can be worn as a regular high ride due to slots cut in the back.  Can be word horizontally on the belt, behind the back, or can be tied off on a pack, frame, or anywhere you may wish.  There is also a drop loop belt loop attached to the sheath by screws.  A swinger attachment can be slipped inside the drop loop belt loop for extreme low carry.  There is also a swivel option.

(shown with natural oil finish)

Swivel/Swinger

This sheath is also very versatile.  It is set up as a low ride swinger.  It does very well for large bowies or camp knives.  The belt loop is made with pull the dot snaps (which are very secure).  With the belt loop made the way it gives you the option of taking off the sheath without undoing your belt.

(shown with acorn & oak leaf two-tone)

Shoulder Rig

These can be made with a regular safety strap over the guard, with a thumb break, or with a PinLoc.  I have even made some with magnets inside the sheath for retention.  You can have just a knife as shown, a knife and accessory pouch, or even a holster for your favorite handgun.

(shown with black leather and rattlesnake inlay)

Piggy Back Drop Loop
shown in two-tone basket weave

Hawk/Hatchet Case
shown with rattlesnake inlay

Quad Position
shown in light brown w/ green sting ray inlay

Assortment of types and finishes to fit
Camillus/OVB/Fisk Bowie